The AM-CRI is a card reader that will support one or two 26-bit, 30-bit, or 31-bit Wiegand input devices. If the readers used have a hold or buffer connection, two readers may be used to the AM-CRI. If the readers do not have a hold or buffer connection, one reader may be used with the AM-CRI. Usually mounted near the readers, the AM-CRI interface connects to the control unit through a PBUS cable. Each reader connects to the AM-CRI through a six-wire (one LED in reader) or seven-wire (two LEDs in reader) cable.
Features
- For equipping a Linear access control system with one or two Wiegand devices
- Card Reader Interface can be used with up to two 26, 30, or 31-Bit Wiegand input devices
- Power is supplied by system controller or external source for locally powered readers
- 4.45″ W x 5.75″ H x 1.5″ D
Order number: ACP00717
| AM-CRI |
| Capacity: |
Up to two 26 or 31-bit Wiegand devices; two internal rotary switches select device address |
| Wiring: |
Each reader connects to the AM-CRI through a six-wire (one LED in reader) or seven wire (two LEDs in reader) cable. |
| Recommended Wiring Type: |
up to 300 feet with 24 AWG, 500 feet with 20 AWG |
| Power: |
Supplied by an AM3Plus, AE1000Plus, or AE2000Plus access controllers or external source for locally powered readers |
| Dimensions: |
4.45″ W x 5.75″ H x 1.5″ D |
| Models compatible with the AM-CRI |
| Model |
Description |
| AE1000Plus |
Commercial Telephone Entry System with Access Control – Four Doors |
| AE2000Plus |
Commercial Telephone Entry System with Access Control – Four Doors, Large Screen |
| AM3Plus |
4-Portal Access Controller |
Installation Manual
