Broadband Communication for GC2 Panels

The Go!Bridge™ IP Communicator provides Internet connectivity between the GC2 Panel and the monitoring service’s Central Station. To enable connectivity, the 900 MHz Transceiver (2GIG-XCVR2-345) must be installed in the Control Panel.

It supports firmware updates over the Internet, provides interactive security services, and enables supervision using signal-forwarding to the Central Station. For wireless communication with the Control Panel, the 900MHz Transceiver Module (2GIG-XCVR2-345) must be installed in the panel. The Go!Bridge also connects to the Internet via a local network router using an Ethernet cable (not provided).

Features

• Secure Internet reporting capabilities
• 256-bit AES Encryption
• Wireless panel integration via 900MHz frequency
• CAT5 Ethernet quick connection to hub/router
• Full Contact ID with high-speed reporting
• Remote access capabilities via Internet or smartphone
• Easy install behind firewalls DHCP Addressing for IP network
• Free firmware update option over the Internet
• Compatible with Alarm.com and Uplink

Specifications

• Wireless Signal Range: 500 ft, open air, with Wireless Control Panel
• Transceiver: Silicon Labs SI1001-E-GM2
• Transceiver Frequency: 25 channel frequency-hopping spread spectrum, 403 kHz channel spacing (910.2-920.275 MHz)
• Modulation Type: GFSK modulation, 128 kpbs
• RF Power: +19dBm Maximum
• Ethernet: 10/100 BaseT
• Dimensions (L x W x H): 6.24 x 4.5 x 1 in
• Weight: 9.6 oz
• Housing Material: Cycoloy™ Resin C2800 (Rated to UL 94 V-0: Flammability Standard)
• Color: White
• Operating Temperature: 32° F to 120.2° F, (0° C to +49° C)
• Relative Humidity: 5-95% Non-Condensing
• Operating Voltage: 5VDC
• Certification: ETL, FCC, IC, IFETEL, and NOM

System Requirements

• GC2 Panel
• Firmware version 1.12 or higher
• 2GIG-XCVR2-345 900 MHz Transceiver
• Internet connection

Model Number: 2GIG-BRDG1-900
Contact us for technical manuals or to be connected with a 2GIG Dealer in your area.