RF DISTRIBUTION AMPLIFIERS |
|
|  | | DA-500A: RF Amplifier
RF amplifier with 18 dB of gain, DTV capable, bandwidth 50 MHz – 1000 MHz forward only |
|
|
|
|
|
|
|
|
|
|
|
|
|  | | H838BID: Bi-directional Video Hub with 5-volt IR
Amplifies signal to eight television locations, two modulator inputs to add locally generated channels, IR repeating system using 5-volt targets, DTV capable, bandwidth: 54 MHz-1000 MHz forward; 5 MHz-42 MHz reverse |
|
|
|
|
AUDIO / VIDEO MODULATORS |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DATA, TELEPHONE, AND VIDEO DISTRIBUTION MODULES |
|
|
|
|  | | DMT-16: Telephone Distribution Module with Surge Protection
Accepts four incoming telephone lines and distributes them to 16 locations with 110 punch-down connectors, four line surge protection with LED indicator for each individual line, RJ-31X jack, and a master disconnect jumper, RJ-45 jack for expansion |
|
|
|  | | DMT-24: Telephone Distribution Module with Surge Protection
Accepts four incoming telephone lines and distributes them to 24 locations with RJ-45 outputs, four line surge protection with LED indicator for each individual line, RJ-31X jack, and a master disconnect jumper, RJ-45 jack for expansion |
|
|
|
|
|  | | H629: Data/Telecom Termination Hub
Includes eight Cat-5e bridgeable circuits (110 punch-down connectors to RJ-45 jacks), and terminates eight Cat-5 wires, eight additional 110 punch-down connectors for bridging up to four telephone lines |
|
|
|  | | H611: Telephone Master Hub with Surge Protection
Distributes up to four incoming telephone lines to up to four telephone wall plates, with a RJ-31X jack for security system seizure of line one, four line surge protection with LED indicator for each individual line, and a master disconnect jumper, RJ-45 jack and 110 punch-down connector for expansion |
|
|
|  | | H616: Telephone Master Hub
Distributes up to four telephone lines to up to six telephone wall plates, RJ-31X jack for security system seizure of line one, RJ-45 jack for telephone line expansion |
|
|
|  | | H618: Telephone Expansion Hub
Distributes up to four telephone lines to up to eight telephone wall plates, RJ-45 expansion jack for connecting multiple H618s |
|
|
|  | | H619: RJ-45 Telephone Interface Hub
Distributes up to four telephone lines to up to 12 telephone locations via RJ-45 jacks, two RJ-45 expansion jacks for looping multiple H619s, 4-line 110 punch-down |
|
|
|  | | H801: Combination Telephone/TV Hub
Two telephone lines can be distributed to six locations via 110 punch-down connectors, CATV or antenna signals can be routed to four locations with balanced splitter, DTV capable, bandwidth: 5 MHz – 1000 MHz |
|
|
|  | | H802: Combination Telephone/TV Hub
Four telephone lines can be distributed to six locations via 110 punch-down connectors, CATV or antenna signals can be routed to four locations with balanced splitter, DTV capable, bandwidth: 5 MHz -1000 MHz |
|
|
|  | | H804: Splitter/Combiner Hub
Balanced splitter, splits CATV or antenna signals to four locations, or combines four inputs into one output, DTV capable, bandwidth: 5 MHz – 1000 MHz |
|
|
|  | | H806: Splitter TV Hub
Balanced splitter, splits CATV or antenna signals to six locations, DTV capable, bandwidth: 5 MHz – 1000 MHz |
|
|
|
|
RF SPLITTERS, FILTERS, AND ACCESSORIES |
|
|  | | 2509-10: 9dB Tap (10-pack)
Provides minimal insertion loss through the output (1 dB), while allowing a signal to be tapped from the original source with high loss (9 dB). Can be used in reverse to combine very high signals with low to normal signals. DTV capable. |
|
|
|
|
|
|
|
|
|
|
|
|
|  | | LPF-470: Low-pass Filter
Removes all channels above the 470 MHz pass band, allowing insertion of locally-generated modulated channels, passes off-air TV channels 2-13 and CATV channels 2-64 |
|
|
|  | | LPF-600: Low-pass Filter
Removes all channels above the 600 MHz pass band, allowing insertion of locally-generated modulated channels, passes off-air TV channels 2-35 and CATV channels 2-86 |
|
|
|  | | LPF-750: Low-pass Filter
Removes all channels above the 750 MHz pass band, allowing insertion of locally-generated modulated channels, passes off-air TV channels 2-60 and CATV channels 2-116 |
|
|
|  | | NF-469: Notch Filter
Removes CATV channels 64-70 and UHF channels 14-19, allowing insertion of locally-generated modulated channels, passes all other channels |
|
|
|  | | NF-470: Notch Filter
Removes CATV channels 70-74 and UHF channels 19-23, allowing insertion of locally-generated modulated channels, passes all other channels |
|
|
| | | NF-471: Notch Filter
Removes CATV channels 75-80 and UHF channels 24-29, allowing insertion of locally-generated modulated channels, passes all other channels |
|
|
|
|
|
|
|
|
|
|
|  | | TC-200A: Tilt Compensator
Provides a balanced signal level by compensating for high frequency cable loss allowing all signal levels on all channels to be of equal amplitude at distant locations |
|
|
|
|
STRUCTURED WIRING ENCLOSURES |
|
|  | | H312KIT: 12″ Plastic Enclosure, Includes Cover
12″ plastic enclosure, provides grid mounting space for Linear’s structured wiring components, fits into standard stud bays or can be surface mounted using our flexi-mount system (slots and tabs), ABS construction, eight 2″ knockouts including one on each side, paint shield, screws and snap-on ABS vented cover included, ETL Listed |
|
|
|  | | H318: 18″ Enclosure
Provides grid mounting space for Linear’s structured wiring components, fits into standard stud bays or can be surface mounted using our flexi-mount system (slots and tabs), 16-gauge all metal construction, eight 2″ knockouts including one on each side |
|
|
|  | | HC18A: 18″ Enclosure Cover
Ventilated enclosure cover secures and protects the structured wiring components mounted inside the H318 enclosure. For additional security, use the optional H208 lock kit. |
|
|
|  | | HD18: 18″ Hinged Door Depth Extension Kit
Removable hinged door that attaches to H318 & H218A enclosure to increase cabinet depth for larger power supplies and improved cooling. For additional security, use the optional H208 lock kit. |
|
|
|  | | H336: 36″ Enclosure
Provides grid mounting space for Linear’s structured wiring components, fits into standard stud bays or can be surface mounted using our flexi-mount system (slots and tabs), 16-gauge all metal construction, eight 2″ knockouts including one on each side |
|
|
|  | | HC36A: 36″ Enclosure Cover
Ventilated enclosure cover secures and protects the structured wiring components mounted inside the H336 enclosure. For additional security, use the optional H208 lock kit. |
|
|
|  | | HD36: 36″ Hinged Door Depth Extension Kit
Removable hinged door that attaches to H336 & H236A enclosure to increase cabinet depth for larger power supplies and improved cooling. For additional security, use the optional H208 lock kit. |
|
|
|  | | H200: Universal Mounting Bracket
The smallest and most economical metal bracket for surface mounting Linear’s structured wiring components, mounts over single or double gang openings, can be used as an adapter for Linear modules in other manufacturer’s enclosures |
|
|
|
|
STRUCTURED WIRING ACCESSORIES |
|
|
|
|  | | H270: Wire Spacer
Makes wiring easier by adding 1″ of space behind the module mounting grid, for the H318, & H336 |
|
|
|
|
|
|
|
|
|
|
|
|
|  | | H208: Lock Kit
Allows locking OpenHouse enclosures with a key to provide additional security, fits HC18A, HC36A, HD18, & HD36 |
|
|
|  | | H271: Coupling Tube
Enclosure accessory for connecting two enclosures 2″ apart, 2″ conduit size |
|
|
|
|
|  | | H281: Adapter
Creates a mounting surface to attach keystone style telephone, data, and coax barrel connectors (connectors not included) to the OpenHouse grid |
|
|
|
|
|
|
AUDIO/VIDEO DISTRIBUTION ACCESSORIES |
|
|  | | 2743: Cable Set
Allows the signals to be looped through without the use of a Y adapter |
|
|
|
|
|
