AUJ SERIES: Extended-Duty Jackshaft Commercial Door Operator

The Nortek Security & Control Family of Brands

Installation and Owner’s Manual –
(Post 2010 UL requirements)
Flyer/Architectural Spec
Fraba Safety Devices Brochure

The AUJ SERIES – Extended-duty jackshaft commercial door operator (for vertical and high lift sectional doors) with floor disconnect series, available in 1/3 and 1/2 horsepower, various supply voltages and phases. Not to exceed 35 cycles per hour, 100+ cycles per day.

Ratings

  • Maximum duty cycle: 35 cycles per hour, 100+ cycles per day
  • Maximum door height: 24 feet

Features

  • Solid state control circuit¬†
  • Constant pressure required to close if no entrapment devices are installed¬†
  • All steel frame
  • Adjustable friction clutch
  • 3/4″ Shafting and 1″ Jackshaft
  • Pillow block bearings on output shaft
  • Floor level disconnect
  • #41 Chain and Sprocket, 1/3 & 1/2 HP
  • Solenoid brake standard
  • Motor overload protection
  • Wired to accept reversing devices
  • Internally adjustable limit switches
  • High starting torque, continuous duty motor
  • 24-Volt control circuit with OPEN, CLOSE and STOP 3-button station
  • OPEN button (and single button) will automatically override down travel and reverse door to the full open position
  • External terminals for single button (residential type) radio control

Factory Options

  • Linear Photo Beam Kit: HAE00056
  • MVP-MR 3-channel open-close-stop modular receiver installed: P/N 2650-159

Warranty

  • 2 years
AUJ SERIES Models
MODELHPVOLTAGE &
PHASE
TYPE
DRIVE
MANUAL DISCONNECTMAXIMUM
DOOR
HEIGHT
AUJ3311
1/3
115V 1P
Jackshaft
Floor level disconnect
24 FT.
AUJ3321
230V 1P
AUJ3323
230V 3P
AUJ3343
460V 3P
AUJ5011
1/2
115V 1P
Jackshaft
Floor level disconnect
24 FT.
AUJ5021
230V 1P
AUJ5023
230V 3P
AUJ5043
460V 3P