Software Downloads

The Nortek Security & Control Family of Brands

AccessBase for Access Control Systems –
AM/II, AE-1, and AE-2

Note for New AccessBase Installations
AccessBase V1.54 is a version upgrade for the V1.52 release. For new installations it is required that AccessBase V1.52 be installed first before installing V1.54. When installing V1.54 over V1.52, V1.52 will be uninstalled first. During the uninstallation process, there will be window pop-ups that will ask whether to delete files that are no longer used by other applications. Click NO to keep all files. After the uninstallation has been successfully completed, run the V1.54 installation package again to install V1.54.

Energy Policy Act of 2005
Linear currently supports the changes in the Daylight Saving Time schedule as part of the Energy Policy Act of 2005 in AccessBase version 1.54 and AccessBase 2000 version 2.6 and later.

Click here for AccessBase Instructions .pdf (1.43MB)

ModelProgramming / Networking SoftwareNew Installations Only
Programming Software
Reference Tutorial
AM/II
AE-1
AE-2

Account Manager for Access Control Systems

ModelLimited Programming Capabilities
AM/II
AE-1
AE-2


AccessBase 2000 Programming Software for Telephone Entry

Microsoft Windows 7 – Compatibility with Linear’s AccessBase 2000
This document describes procedures necessary to ensure that Linear’s AccessBase 2000 software product installs and runs as expected on PCs that run Microsoft’s Windows 7 operating system.

Click here for the AccessBase 2000 Windows 7 Compatibility Technical Note .pdf (220KB)

Access ControllerAccessBase 2000
Programming Software
AE1000Plus, AE2000Plus, AM3Plus
and Legacy Controllers
AE-1000, AE-2000, AM-3


AM-SEK Serial-to-Ethernet Module

 

Access ControllerUtility Software
AE1000Plus
AE2000Plus
AM3Plus
Quick Start Guide


AXNET PC Utility Software (Backup/Restore, Event Log, Firmware Uploader)

Access ControllerUtility SoftwareInstallation & User’s Guide
AE1000Plus
AE2000Plus
AM3Plus
AXNET Access Controller
Software Manual
226505B


DRU500 Application – Allows users to restore an AE-500 if their computer does not have Microsoft Virtual Machine installed

DRU500 ApplicationInstructions


IEI Access Solutions

Hub Manager®
Professional
Instructions 
8.1.3.30Version 8.1 – Microsoft Windows XP/Vista/7/8 

Hub Manager® software requires an enrollment station if a format is used that is not natively listed in the Hub Manager® software (i.e. 37-bit cards with a facility code of 600). Since we are no longer offering the custom format service, dealers may purchase an enrollment station, model EN-STAT: Prox Enrollment Station Kit (Order #0-205680) to create their own custom formats.

7.4.9Version 7.4 – Microsoft Windows 2000/XP – Max2 Controllers with Modem – 
Systems using Max2 Controllers with Modems require Hub Manager® 7.4.9 for proper operation.
Version 3.3
eMerge Support & Downloads 
Click here for eMerge Support Documentation CD


Personal Emergency Reporting Solutions (PERS)

ModelProgramming
Software
Reference
Manual for
Programming
Installation
Manual
User
Manual
PERS-2400A
PERS-2400B
PERS-3600
PERS-3600B
PERS-4200
PERS-4200

Console Firmware – Version 2.4.3(365KB)


Console Vocabulary
English/Spanish (2.50MB)

(Standard for FW version 2.4.2)


Console Vocabulary
French/English (2.50MB)

(Optional for FW version 2.4.2)

PERS-4200X


Video Surveillance

IP Search Tool
This enables the IP address of the Linear IP Camera to be changed easily. The instructions and tool are located at this link: IP Search Tool (.zip)

IP Update Tool
This software tool enables you to update the firmware in Linear IP cameras. Read and follow the instructions. Note, video streaming and recording will be halted during the firmware update process.

The IP Update Tool Instructions may be downloaded here: IP Update Tool Instructions (.pdf)
The IP Update Tool may be downloaded here: IP Update Tool (.zip 3.43MB)

IP Camera Firmware v 1.7
This is the latest version of firmware for Linear IP cameras. Use the IP Update Tool to download the firmware to the camera.

  The IP Camera Firmware may be download here: IP Camera Firmware v1.7 (.zip 28.78MB)
Release Notes for IP Camera Firmware v1.7 may be downloaded here:
IP Camera Firmware 1.7 Release Notes (.pdf)

NVMS (Network Video Manager System)
This software enables multiple IP cameras to record to a PC. The NVMS software can manage up to 64 Linear IP cameras. The instructions and software are located at this link: NVMS (Network Video Manager System) (.zip)

PC Requirements for NVMS Software
FeatureMinimumRecommended
CPU:Intel® Core™ i5 CPU 2.8GHzIntel® Core™ i7 CPU 3GHz or faster
Video card:NVIDIA GForce GT 240 (1G)NVIDIA GForce GT 240 (2G)
Memory:4G DDR38G DDR3
Hard drive:2TB4TB to 12TB
Operating System:Windows 7, XP, 2003Windows 7, XP
DirectX:DirectX 9.0cDirectX 9.0c
Internet:1 GB LAN1 GB LAN

Manage up to 64 Linear IP Cameras
View up to 16 live streams (PC power dependant)
Recommend AV Class HDDs up to 4TB each (Seagate or WD)

The following IP Camera Models use the IP Search Tool and NVMS software:

Model
Description 
LV-D4-2MDI-312Indoor Dome Camera, 4″, 2MP, Full HD
LV-D4-2MDIV-312Vandal Resistant Dome Camera, 4″, 2MP, Full HD
LV-D4-3MDIWV312Vandal Resistant Outdoor Dome Camera, 4″, 3MP, Full HD
LV-D4-5MDIV-312Vandal Resistant Outdoor Dome Camera, 4″, 5MP, Full HD
LV-D2-2MIV-3.6FMini Vandal Resistant Outdoor Dome Camera, 2″, 2MP, Full HD
LV-B2MDI-312Mini Outdoor Bullet Camera, 2MP
LV-B3MDIW-312Mini Outdoor Bullet Camera, 3MP
LV-CAM-2MFixed Box Camera, 2MP
LV-CAM-3MWFixed Box Camera, 3MP
LV-CAM-5MFixed Box Camera, 5MP

GC3 Firmware Update

The 2GIG GC3 Security and Home Automation Panel can be updated with just a USB drive making it quick and easy to always have the latest firmware.

Instructions

  • Download the firmware update file.
  • Save the firmware file to the root directory of a USB flash drive.
  • Note:  The USB flash drive must have only one partition
  • Plug the USB flash drive into the USB port on the top of the GC3 panel.
  • You will see a notice that there is a new firmware to install. Select Update
  • Enter the Installer code or Master code.
  • The GC3 will install the update and restart

Download the firmware update file.
Save the firmware file to the root directory of a USB flash drive.
Note:  The USB flash drive must have only one partition
Plug the USB flash drive into the USB port on the top of the GC3 panel.
You will see a notice that there is a new firmware to install. Select Update
Enter the Installer code or Master code.
The GC3 will install the update and restart

Firmware Downloads (V3.0.2)

GC3 Firmware Update V3.0.2 

System Requirements

  • PC running Windows XP or later (Mac OS not supported)
  • One available USB port (USB v1.1 or later)
  • A working knowledge of installing drivers and running applications on a Windows computer
  • The Firmware Update Tool (for PC) and instructions

Release Notes


2GIG-UPCBL2

Firmware update cable for GC2 & TS1

The Firmware Update Cable (2GIG-UPCBL2) along with the Firmware Update Tool (for PC) allows dealers to update firmware in the GC2 panel and TS1 keypad without incurring Over-the-Air (OTA) update charges from Alarm.com.

2GIG-UPCBL2
 
Instructions (PDF)

Version 1.17.0.3 updates version 1.9 or later

English

French 

Portuguese

Spanish

Turkish

Firmware Downloads (V1.17.0.3)

Includes: CP firmware update tool
Drivers for 2GIG-UPCBL2  (Version 1.17.0.3)

Firmware Downloads (V1.16)

Includes: CP firmware update tool
Drivers for 2GIG-UPCBL2  (Version 1.16)

Features

  • Quickly and easily update the 2GIG Control Panel and TS1 keypad without incurring OTA update charges from Alarm.com
  • Connect to a PC directly to a 2GIG Control Panel and TS1 keypad using the Firmware Update Cable to update to the latest firmware

System Requirements

  • PC running Windows XP or later (Mac OS not supported)
  • One available USB port (USB v1.1 or later)
  • A working knowledge of installing drivers and running applications on a Windows computer
  • The Firmware Update Tool (for PC) and instructions

Availability & Ordering

  • Firmware Update Cables are ordered individually using the SKU# 2GIG-UPCBL2 or UPC Code 8-17082-01071-7

Pricing

  • Please contact your 2GIG Distributor or Sales Representative for pricing details

2GIG-UPDV

Easy updater for GC2

The Easy Updater for GC2 (2GIG-UPDV) is a compact, portable tool that lets installers in the field load the latest firmware update onto the Control Panel and Wireless Touchscreen Keypad (2GIG-TS1)—without requiring a computer. This device will update GC2 Control Panel with Firmware 1.9 and higher, and Touchscreen Keypad with 1.8 and higher. With a compact design intended to easily fit in a technician’s toolbox, the device ships with the firmware update package already installed.

2GIG-UPDV

 
Instructions (PDF)

Instructions

Firmware Update to v1.17.0.3 for Dealers using the Easy Updater for GC2 (2GIG-UPDV).

It’s easy to update the Easy Updater for GC2:

Download the correct language file executable from the list to the right.
Plug the Easy Updater into the PC using a micro-USB data cable (not included).
Run the language file executable you downloaded.

Now you’re ready to start flashing GC2 panels and TS1 Keypads with the new v1.17.0.3 firmware.

Version 1.17.0.3 updates version 1.9 or later

English

French

Portuguese

Spanish

Turkish

Firmware Downloads (V1.17.0.3)

Firmware for 2GIG-UPDV. Update is version 1.17.0.3.


2GIG Video Cameras & Network Video Recorder

Instructions & Software Downloads
The 2GIG Video Solution is a Peer-to-Peer (P2P) video solution that offers direct video connection between your smartphone (or other client device) and the camera/NVR. There are no monthly connection fees. Store video on the camera or NVR.

2GIG Video Cameras & Network Video Recorder

Models: 2GIG-CAM-100W, 2GIG-CAM-250P, 2GIG-CAM-250PB, 2GIG-NVR1-1T

The following software applications and instructions ship on a mini-CD with each camera model and NVR.

Instructions

The following installation instructions can be found below:

2GIG-CAM-100W Quick Start

2GIG-CAM-250P Quick Start

2GIG NVR Installation

2GIG Software Setup

2GIG IP Camera Operation Manual

Software Downloads 

The following software downloads can be found below:

2GIG Video App:

2GIG VIDEO APP2GIG VIDEO APP Ipad
Use this app to connect to 2GIG IP Cameras from your smartphone or tablet.View live video anywhere (requires WiFi or Internet connection)

Full HD 720p or 1080p Real-time video

Playback video

Configure video options

Easy-to-use

Google Play App

Android Version: 1.1.0
Download Android app

Apple Store App
iOS Version: 1.1.1
Download Apple iOS app


2GIG NVR App

2GIG NVR App2GIG NVR App Phone

Use this app to connect to 2GIG NVR from your smartphone or tablet.

View live video anywhere (requires WiFi or Internet connection)

Full HD 720p or 1080p Real-time video

Playback video

Configure video options

Easy-to-use

Google Play AppAndroid Version:                 1.1.1

Download Android app

Apple Store App

iOS Version:                          1.1.1

Download Apple iOS app


IP Search IP Search Tool

The IP Search Tool will search for and identify 2GIG cameras connected to the LAN.  This allows you to change the IP address for each camera.  Most 2GIG cameras have a default IP address of 192.168.0.120 and user name = admin and password = admin .  This program is designed to run on a Windows OS on a PC connected to the same LAN as the 2GIG cameras.

Program Name: IPSearch.exe Version: 2.5

Operating System Required:  Windows XP, 7, 8, 10

Click here to download the zip file.  [zip “IP Search” folder]

To install the application, unzip the file and run the IPSearch application.


Media PlayerMedia Player

To playback video recorded by a 2GIG Camera, use the Media Player application.  This allows you to play, pause, rewind, fast forward and control audio and save snaphots.  This program is designed to run on a Windows OS on a PC connected to the same LAN as the 2GIG cameras.

Program Name: MediaPlayer.exe Version: 1.0.2.7

Operating System Required:  Windows XP, 7, 8, 10

Click here to download the zip file.  [zip “Media_Player” folder]

To install the application, unzip the file and run the Media Player application


 Update ToolUpdate Tool

When new firmware is released for the 2GIG Cameras, use the Update Tool to load the new firmware onto the cameras. This program is designed to run on a Windows OS on a PC connected to the same LAN as the 2GIG cameras.

Program Name: UpdateTool.exe Version: 1.2.0.20

Operating System Required:  Windows XP, 7, 8, 10

Click here to download the zip file.  [zip “UpdateTool” folder]

To install the application, unzip the file and run the Update Tool application.


Time ToolSync Time Tool Server

Sync Time Server / Service for IP Cameras

Time plays an important part in video surveillance systems.  All devices should be connected to the same clock to synchronize time.  For security concerns, many installations do not allow cameras to directly access to Internet, thus the cameras cannot get the current time or time sync from a Network Time Protocol Server.

The Device NTP allows a PC on the local LAN to become a time server. The application should be installed on a PC and run 24×7.  The PC may also be configured to connect to an NTP time server or Microsoft Windows time service to maintain proper date and time configuration. This program is designed to run on a Windows OS on a PC connected to the same LAN as the 2GIG cameras.

Program Name: DeviceNTPv1.5 Version: 1.5

Operating System Required:  Windows XP, 7, 8, 10

Click here to download the zip file.  [zip “Time_Tool” folder]

To install the application, unzip the file and run the Device NTP v1.5 application.

Click here to download Instructions.      [link to “Sync Time Server.pdf”]

This page contains some of our technical printed documentation and installation manuals for IEI (International Electronics, Inc.) products, which are available for download. NOTE: Support documentation posted on this Web page for old or discontinued products may contain telephone numbers and/or addresses that are no longer valid. Please refer to the Contact Us page for up-to-date contact information.

Click here for IEI software downloads
eMerge Embedded Software Systems Sub-Catalog (.pdf)
Secured Series PC Based Systems Sub-Catalog (.pdf)
Stand Alone Access Control Sub-Catalog (.pdf)
Intrusion Detection and Access Control Accessories Sub-Catalog (.pdf)

IEI CURRENT MODELS

ModelSupporting Documents
2000e
2000eM
2000 Series Quick Start Guide
2000 Series Full Manual
2000 Series Output Expansion Mod
212iInstallation Manual
Product Specifications
Programming Guide
212iLM-AL
212iLM-BZ
Product SpecificationsInstallation Manual
212iLWProduct SpecificationsInstallation Manual
212RProduct Specifications
Programming Guide
Installation Manual
212SEProduct Specifications
Programming Guide
Installation Manual
212wProgramming GuideInstallation Manual
232FXProduct SpecificationsInstallation Manual
232iInstallation ManualProgramming Guide
232iLM-AL
232iLM-BZ
Product SpecificationsInstallation Manual
232RProduct Specifications
Programming Guide
Installation Manual
232SEProduct Specifications
Programming Guide
Installation Manual
232wProgramming GuideInstallation Manual
242iLWProduct BulletinInstallation & Programming Guide
262BProduct SpecificationsInstallation Manual
550LSProduct SpecificationsInstallation Manual
555LS
557LS
Installation ManualDatasheet
834LInstallation ManualDatasheet
834LWCInstallation ManualDatasheet
CR500WInstallation Manual
DTDUser Guide
eMerge Essential
eMerge Elite
e3 OneBox™
Installation Manual 620-100531B
Quick Start Guide 620-100540B
User Manual 620-100240E
Guía de programacíon para el usuario 620-100440D
Guía de instalacíon 620-100439D
Guía de inicio rápido 620-100441X2
eMergeeMerge 50/5000 Specs
eMerge V3.3 Support
eMerge MicroNode Specs
EZ-RexInstallation Manual
HC500PInstallation Manual
Hub Door Control ModuleInstallation Guide
HubMax IIInstallation Addendum
PC Connection Guide
Installation Manual
prox.pad program addendum for Hub Max connection
Hub MiniMax IIInstallation Addendum
PC Connection Guide
Installation Manual
prox.pad program addendum for Hub Max connection
HUBSWR
Version 8
Hub Manager® Software
Compatibility Tech Bulletin
Software User Manual
Software Download
LS-1Product Specifications
LS1 Programming
LS1 Wiring
Installation Manual
LS Mortise Installation
LS Install Template
LS-2
LS-2P
Product Specifications
Keypad Programming
Installation Manual
LS Install Template
M3MProduct SpecificationsInstallation Manual
Max3Datasheet
Configuration Guide for a 1 to 8 door installation
Installation Manual
MiniMax 3Datasheet
Configuration Guide for a 1 to 8 door installation
Installation Manual
MiniProxInstallation Manual
PG-1224-3
PG-1224-3-C
Installation Manual
PKAC-110DatasheetInstallation Manual
prox.padInstaller Guide
Outdoor Installation Addendum
Installation Manual
End User Guide
program addendum when used with HubMax or Minimax
prox.pad plusProduct Specifications
Outdoor Installation Addendum
Installation Manual
prox.pad plus IRProduct SpecificationsInstallation Manual
ProxPoint PlusInstallation Manual
ProxPro IIInstallation Manual
SEG-1DatasheetInstallation Manual
SEG-MInstallation Manual
SS-ProxPointProduct SpecificationsInstallation Manual
SS-KP500R-WHProduct Specifications
Programming Guide
Installation Manual
SS-KP500WPProduct SpecificationsInstallation Manual
SSW-FXProduct SpecificationsInstallation Manual
SSW-iLM-AL
SSW-iLM-BZ
Product Specifications
Datasheet
Installation Manual
ThinLine IIInstallation Manual
USB-SerialInstallation Manual

IEI DISCONTINUED MODELS

ModelSupporting Documents
212eProduct SpecificationsInstallation & Program Guide
212eMProduct SpecificationsInstallation & Program Guide
212iLProduct SpecificationsInstallation & Program Guide (10 Wire Harness)
Installation Manual (6 Wire Harness)
212iLR, 232iLRProduct Bulletin212 Manual
232 Manual
212iLSE, 232iLSEProduct Bulletin212 Manual
232 Manual
212xt, 232xt, 272xtProduct Specifications
Installation Manual – 212xt
Programming Guide – 232xt
Programming Guide – 212xt
Installation Manual – 232xt
Installation & Program Guide – 272xt
232eProduct SpecificationsInstallation & Program Guide
233Programming Guide
Wiring and Specifications
ATM Vestibule Addendum
234 & CR/KP500WInstallation Manual – 234Programming Guide – 234
242eProduct SpecificationsInstallation & Program Guide
242eMProduct SpecificationsInstallation & Program Guide
272WPProduct SpecificationsInstallation & Program Guide
510Product SpecificationsInstallation Manual
552LSProduct SpecificationsInstallation Manual
555LSInstallation Manual
Hub Plus KitInstallation & Program Guide
KP500i, 272iInstallation & Program Guide – 272i
KP500mp, 272mp, 232mpInstallation Manual – 232mp
Programming Guide – 232mp
Installation & Program Guide – 272mp
KP500XTProduct Specifications
PKAC-220DatasheetInstallation Manual
MINIMAXIISK1Installation & Program Guide
PC Connection Guide
Installation Addendum
prox.pad program addendum for Hub Max connection
PG 1224-1-C
PG 1224-1
Product Specifications
SS-NT MAXIPROInstallation Manual
SSWe
SSW-eM
Installation & Program Guide
SS-TCH500W
veri-testDatasheet